Turns out we can use abi::__cxa_demangle() for this, and all we need to
provide is sprintf(), realloc() and free(), so this patch exposes them.
We now have fully demangled C++ backtraces :^)
The fault was happening when retrieving a current backtrace for the
SystemServer process.
To generate a backtrace, we go into the paging scope of the process,
meaning we temporarily switch to using its page directory as our own.
Because kernel VM is allocated on demand, it's possible for a process's
mappings above the 3GB mark to be out-of-date. Normally this just gets
fixed up transparently by the page fault handler (which simply copies
the PDE from the canonical MM.kernel_page_directory() into the current
process.)
However, if the current kernel *stack* is in a piece of memory that
the backtraced process lacks up-to-date PDE's for, we still get a page
fault, but are unable to handle it, since the CPU wants to push to the
stack as part of calling the page fault handler. So we're screwed and
it's a triple-fault.
Fix this by always updating the kernel VM mappings before switching
into a paging scope. In practical terms, this is a 1KB memcpy() that
happens when generating a backtrace, or doing exec().
Previously it was not possible to see what each thread in a process was
up to, or how much CPU it was consuming. This patch fixes that.
SystemMonitor and "top" now show threads instead of just processes.
"ps" is gonna need some more fixing, but it at least builds for now.
Fixes#66.
Then only allow regions with that bit to be manipulated via munmap()
and mprotect(). This prevents messing with non-mmap()ed regions in
a process's address space (stacks, shared buffers, ...)
This patch adds ProtocolServer, a server that handles network requests
on behalf of its clients. The first protocol implemented is HTTP.
The idea here is to use a plug-in architecture where any number of
protocols can be added and implemented without having to mess around
with each client program that wants to use the protocol.
A simple client API is provided through LibProtocol::Client. :^)
The kernel is now no longer identity mapped to the bottom 8MiB of
memory, and is now mapped at the higher address of `0xc0000000`.
The lower ~1MiB of memory (from GRUB's mmap), however is still
identity mapped to provide an easy way for the kernel to get
physical pages for things such as DMA etc. These could later be
mapped to the higher address too, as I'm not too sure how to
go about doing this elegantly without a lot of address subtractions.
This adds a call to set_metadata_dirty(true) to
Ext2FS::write_directory(). This fixes a bug wherein InodeWatchers
weren't alerted on directory updates.
Remove explicit checking for pending signals from writing code paths,
since this is handled automatically when blocking, and should not
happen if the write() call is "short", i.e. doesn't block. All the
other syscalls already work like this.
Fixes https://github.com/SerenityOS/serenity/issues/797
After a socket has disconnected, we shouldn't return -EAGAIN. Instead
we should allow userspace to read/recvfrom the socket until its packet
queue has been exhausted.
At that point, we now return 0, signalling EOF.
It might be even better to start returning -ENOTCONN after signalling
EOF once. I'm not sure how that should work, needs looking into.
Instead of trying to build the host-side code generator helpers right
before we need them in the LibHTML build process, just build them ahead
of time in makeall.sh, like we already do for {IPC,Form}Compiler.
This is a bit gentler than jumping to 0x0, which always crashes the
whole process. Also log a debug message about what happened, and let
the user know that it's probably time to rebuild the program.
Add an initial implementation of pthread attributes for:
* detach state (joinable, detached)
* schedule params (just priority)
* guard page size (as skeleton) (requires kernel support maybe?)
* stack size and user-provided stack location (4 or 8 MB only, must be aligned)
Add some tests too, to the thread test program.
Also, LibC: Move pthread declarations to sys/types.h, where they belong.
This can be implemented entirely in userspace by calling tcgetattr().
To avoid screwing up the syscall indexes, this patch also adds a
mechanism for removing a syscall without shifting the index of other
syscalls.
Note that ports will still have to be rebuilt after this change,
as their LibC code will try to make the isatty() syscall on startup.
Have pthread_create() allocate a stack and passing it to the kernel
instead of this work happening in the kernel. The more of this we can
do in userspace, the better.
This patch also unexposes the raw create_thread() and exit_thread()
syscalls since they are now only used by LibPthread anyway.
VM regions can now be marked as stack regions, which is then validated
on syscall, and on page fault.
If a thread is caught with its stack pointer pointing into anything
that's *not* a Region with its stack bit set, we'll crash the whole
process with SIGSTKFLT.
Userspace must now allocate custom stacks by using mmap() with the new
MAP_STACK flag. This mechanism was first introduced in OpenBSD, and now
we have it too, yay! :^)
Now that the kernel supports startup-time constructors, we were first
doing slab_alloc_init(), and then the constructors ran later on,
zeroing out the freelist pointers.
This meant that all slab allocators thought they were completelty
exhausted and forwarded all requests to kmalloc() instead.
It's now possible to block until another thread in the same process has
exited. We can also retrieve its exit value, which is whatever value it
passed to pthread_exit(). :^)
While executing in the kernel, a thread can acquire various resources
that need cleanup, such as locks and references to RefCounted objects.
This cleanup normally happens on the exit path, such as in destructors
for various RAII guards. But we weren't calling those exit paths when
killing threads that have been executing in the kernel, such as threads
blocked on reading or sleeping, thus causing leaks.
This commit changes how killing threads works. Now, instead of killing
a thread directly, one is supposed to call thread->set_should_die(),
which will unblock it and make it unwind the stack if it is blocked
in the kernel. Then, just before returning to the userspace, the thread
will automatically die.
This patch adds pthread_create() and pthread_exit(), which currently
simply wrap our existing create_thread() and exit_thread() syscalls.
LibThread is also ported to using LibPthread.
Also added an option in the run script to force PIO operation mode with
the IDE controller.
In addition, we're no longer limited to PIIX3 and PIIX4 chipsets for DMA
Now that the SystemMonitor queries which open files can be read and written to,
having can_read()/can_write() unconditionally call ASSERT_NOT_REACHED() leads
to system crashes when inspecting the WindowServer.
Instead, just return true from can_read()/can_write() (indicating that the
read()/write() syscalls should not block) and return -EINVAL when trying to
actually read from or write to these devices.
Added a script to build QEMU from source as part of the Toolchain.
The script content could be in BuildIt.sh but has been put in
a seperate file to make the build optional.
Added PATH=$PATH to sudo calls to hand over the Toolchain's PATH
setup by UseIt.sh. This enabled the script's to use the QEMU
contained in the SerenityOS toolchain.
Deleted old documentation in Meta and replaced it by a new
documentation in the Toolchain folder.
The Launcher's functionality has been replaced by the app shortcuts in
the system menu.
There were various window management hacks to ensure that the launcher
stayed below all other windows while also being movable, etc.
Some syscalls have to pass parameters through a struct, since we can
only fit 3 parameters with our calling convention.
This patch makes use of C++ structured binding to clean up the places
where we expand those parameters structs into local variables.
POSIX's openat() is very similar to open(), except you also provide a
file descriptor referring to a directory from which relative paths
should be resolved.
Passing it the magical fd number AT_FDCWD means "resolve from current
directory" (which is indeed also what open() normally does.)
This fixes libarchive's bsdtar, since it was trying to do something
extremely wrong in the absence of openat() support. The issue has
recently been fixed upstream in libarchive:
https://github.com/libarchive/libarchive/issues/1239
However, we should have openat() support anyway, so I went ahead and
implemented it. :^)
Fixes#748.
