When encountering a box that claims to have block-level children, but
its CSS display type isn't actually "flow" inside, we would previously
crash due to a VERIFY() failure.
However, many sites choke on this due to freestanding table-related
boxes like those created by "table-row" and "table-row-group".
We're supposed to fix those up by wrapping them in a full set of table
boxes during layout tree construction, but that algorithm obviously
isn't working correctly in all cases. So let's work around the crashes
for now, allowing many more sites to load (even if visually incorrect.)
This is a rather monstrous hack, and we should get rid of it as soon as
it's not needed anymore.
"5em" means 5*font-size, but by forcing "em" to mean the presentation
size of the bitmap font actually used, we broke a bunch of layouts that
depended on a correct interpretation of "em".
This means that "em" units will no longer be relative to the exact
size of the bitmap font in use, but I think that's a compromise we'll
have to make, since accurate layouts are more important.
This yields a visual progression on both ACID2 and ACID3. :^)
Previously, these were added during layout. This didn't fit into the new
world where layout doesn't mutate the tree incrementally, so this patch
adds logic to Layout::TreeBuilder for adding a marker to each list-item
box after its children have been constructed.
This patch adds a map of Layout::Node to FormattingState::NodeState.
Instead of updating layout nodes incrementally as layout progresses
through the formatting contexts, all updates are now written to the
corresponding NodeState instead.
At the end of layout, FormattingState::commit() is called, which
transfers all the values from the NodeState objects to the Node.
This will soon allow us to perform completely non-destructive layouts
which don't affect the tree.
Note that there are many imperfections here, and still many places
where we assign to the NodeState, but later read directly from the Node
instead. I'm just committing at this stage to make subsequent diffs
easier to understand.
The purpose of this new object will be to keep track of various states
during an ongoing layout.
Until now, we've been updating layout tree nodes as we go during layout,
which adds an invisible layer of implicit serialization to the whole
layout system.
My idea with FormattingState is that running layout will produce a
result entirely contained within the FormattingState object. At the end
of layout, it can then be applied to the layout tree, or simply queried
for some metrics we were trying to determine.
When doing subtree layouts to determine intrinsic sizes, we will
eventually be able to clone the current FormattingState, and run the
subtree layout in isolation, opening up opportunities for parallelism.
This first patch doesn't go very far though, it merely adds the object
as a skeleton class, and makes sure the root BFC has one. :^)
The ICB (initial containing block) gets its style from StyleComputer's
create_document_style(). It's basically a generic style for the root of
the layout tree.
With this patch, we now assign the width and height of the viewport rect
as two CSS "px" lengths to the "width" and "height" properties of the
ICB style. (Previously they were just defaulting to "auto" and we
assigned override dimensions during layout.)
This fixes an issue where position:absolute elements with relative width
and/or height were not dimensioned correctly, since the values were
relative to the width and/or height of the ICB style.
This implements basic support for dynamic markup insertion, adding
* Document::open()
* Document::write(Vector<String> const&)
* Document::writeln(Vector<String> const&)
* Document::close()
The HTMLParser is modified to make it possible to create a
script-created parser which initially only contains a HTMLTokenizer
without any data. Aditionally the HTMLParser::run method gains an
overload which does not modify the Document and does not run
HTMLParser::the_end() so that we can reenter the parser at a later time.
Furthermore all FIXMEs that consern the insertion point are implemented
wich is defined in the HTMLTokenizer. Additionally the following
member-variables of the HTMLParser are now exposed by getter funcions:
* m_tokenizer
* m_aborted
* m_script_nesting_level
The HTMLTokenizer is modified so that it contains an insertion
point which keeps track of where the next input from the Document::write
functions will be inserted. The insertion point is implemented as the
charakter offset into m_decoded_input and a boolean describing if the
insertion point is defined. Functions to update, check and {re}store the
insertion point are also added.
The function HTMLTokenizer::insert_eof is added to tell a script-created
parser that document::close was called and HTMLParser::the_end() should
be called.
Lastly an explicit default constructor is added to HTMLTokenizer to
create a empty HTMLTokenizer into which data can be inserted.
Also, update the expected hash in the LibWeb TestHTMLTokenizer
regression test.
This is due to the "This comment has a few too many dashes." comment
token being updated.
Newline normalization will replace \r and \r\n with \n.
The spec specifically states
> Before the tokenization stage, the input stream must be preprocessed
> by normalizing newlines.
wheras this is implemented the processing during the tokenization
itself.
This should still exhibit the same behaviour, while keeping the
tokenization logic in the same place.
In 'NamedCharacterReference' we attempt to lookup the code point by a
identifier, eg apos; becomes '
This is done by passing the entire rest of the document to the
`HTML::code_points_from_entity` function.
However, before this change we didn't sent the final character which
meant if the document ended in a named character reference the lookup
would fail.
This follows the ECMA402 spec and means String.prototype.localeCompare
will automatically become actually locale aware once StringCompare is
actually implemented based on UTS #10.
This commit adds an initial implementation (without any real locale
support) of Collator Compare Functions, as well as the matching
CompareStrings AO. These two are used to implement the ECMA402 version
of String.localeCompare() and Int.Collator.compare().
Resolves one FIXME where we can now pass a realm, and sets the length
correctly in a bunch of places that previously didn't.
Also reduces the number of "format function name string from arbitrary
PropertyKey" implementations, although two more remain present in the
AST (used with ECMAScriptFunctionObjects, which is a different beast).
Also take a length argument and set the name and length properties
internally, instead of at the call site. Additionally, allow passing a
realm, prototype, and prefix.
The old FIXME asserting that Core::AnonymousBuffer cannot be invalid
or zero-sized is no longer accurate. Add a default constructor for
Audio::Buffer that has all invalid state instead of going to the OS to
allocate a 1 sample buffer for the "no more samples" states in the WAV
and FLAC plugins.
While quantifying assertions is very much meaningless, the specification
allows them with annex B's extended grammar for browsers, so read and
apply the quantifiers.
Fixes#12373.
Although it is not said that some of the elements need to be italic,
*most* browsers mark them as such to distinguish them from the normal
text, so let's do that too!
The entry we get from the active formatting elements list during the
Rewind step of "reconstruct the active formatting elements" can be a
marker. Previously we assumed it was not a marker, which can trigger
an assertion failure with certain malformed HTML.
If the entry in this step is a marker, the spec simply ignores it.
This is step 6 of the algorithm.
This also makes the index unsigned, as this algorithm is a no-op if
the list is empty.
Additionally, this also adds spec comments to this algorithm.
Fixes#12668.
This patch adds a default padding around the contents of text <input>
elements. It adds these defaults to the existing style attribute in
'HTMLInputElement::create_shadow_tree_if_needed()'.
Use a default padding for text <input> elements:
- padding-top and padding-bottom: 1px
- padding-left and padding-right: 2px
These values seems to align with what other browsers do.
This also adds a variant of {add,remove}_event_listener called
{add,remove}_event_listener_with_options.
This is used internally to perform {add,remove}_event_listener with a
default constructed options struct. It was done like this because
default constructing the Variant with the options struct requires the
struct defintions to be present, which requires us to include
AbortSignal.h, which would cause a circular include as AbortSignal.h
includes EventTarget.h.
Some grayscale JPG images might have the horizontal and vertical sample
factor set to 2. However, the macroblocks in these images are not
interleaved as they would be in color images.
Previously it would accept any DOMString, as we didn't support enums at
the time. Now it will only accept what's specified in the
DOMParserSupportedType enum.
This also adds spec comments to DOMParser::parse_from_string.
We were previously manually initializing them instead of just calling
GlobalObject::initialize_constructor, which aside from duplicating code
also meant we didn't set the required name property.
Normally we don't layout position:absolute elements until after the
parent formatting context has assigned dimensions to the current
formatting context's root box.
However, some of our parent contexts (especially FFC) don't do this
reliably, which makes position:absolute children have 0x0 dimensions.
Hack this for now by making ~BFC() pretend that the parent assigned
dimensions if it hadn't done it already.
This returns a String with this format:
- LayoutNodeClassName<TAG_NAME>#id.class1.class2.class3
I've rewritten this function 10+ times at this point, so I'm just gonna
add it to the repository for future debugging needs. :^)
