This enables further work on implementing KASLR by adding relocation
support to the pre-kernel and updating the kernel to be less dependent
on specific virtual memory layouts.
This was previously used for a single debug logging statement during
memory purging. There are no remaining users of this weak pointer,
so let's get rid of it.
This patch changes the semantics of purgeable memory.
- AnonymousVMObject now has a "purgeable" flag. It can only be set when
constructing the object. (Previously, all anonymous memory was
effectively purgeable.)
- AnonymousVMObject now has a "volatile" flag. It covers the entire
range of physical pages. (Previously, we tracked ranges of volatile
pages, effectively making it a page-level concept.)
- Non-volatile objects maintain a physical page reservation via the
committed pages mechanism, to ensure full coverage for page faults.
- When an object is made volatile, it relinquishes any unused committed
pages immediately. If later made non-volatile again, we then attempt
to make a new committed pages reservation. If this fails, we return
ENOMEM to userspace.
mmap() now creates purgeable objects if passed the MAP_PURGEABLE option
together with MAP_ANONYMOUS. anon_create() memory is always purgeable.
This patch greatly simplifies VMObject locking by doing two things:
1. Giving VMObject an IntrusiveList of all its mapping Region objects.
2. Removing VMObject::m_paging_lock in favor of VMObject::m_lock
Before (1), VMObject::for_each_region() was forced to acquire the
global MM lock (since it worked by walking MemoryManager's list of
all regions and checking for regions that pointed to itself.)
With each VMObject having its own list of Regions, VMObject's own
m_lock is all we need.
Before (2), page fault handlers used a separate mutex for preventing
overlapping work. This design required multiple temporary unlocks
and was generally extremely hard to reason about.
Instead, page fault handlers now use VMObject's own m_lock as well.
This implements a simple bootloader that is capable of loading ELF64
kernel images. It does this by using QEMU/GRUB to load the kernel image
from disk and pass it to our bootloader as a Multiboot module.
The bootloader then parses the ELF image and sets it up appropriately.
The kernel's entry point is a C++ function with architecture-native
code.
Co-authored-by: Liav A <liavalb@gmail.com>
This enables the Lock class to block a thread even while the thread is
working on a BlockCondition. A thread can still only be either blocked
by a Lock or a BlockCondition.
This also establishes a linked list of threads that are blocked by a
Lock and unblocking directly unlocks threads and wakes them directly.
Previously we would simply assume that Region allocation always
succeeded. There is still one such assumption when splitting user
regions inside a Space. That will be dealt with in a separate commit.
Now that Region::name() has been changed to return a StringView we
can't rely on keeping a copy of the region's name past the region's
destruction just by holding a copy of the StringView.
- Make Region::create_kernel_only OOM safe.
- Make Region::create_user_accessible mostly OOM safe, there are still
some tendrils to untangle before it and be completely fixed.
Replace the AK::String used for Region::m_name with a KString.
This seems beneficial across the board, but as a specific data point,
it reduces time spent in sys$set_mmap_name() by ~50% on test-js. :^)
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
Alot of code is shared between i386/i686/x86 and x86_64
and a lot probably will be used for compatability modes.
So we start by moving the headers into one Directory.
We will probalby be able to move some cpp files aswell.
Increase type-safety moving the MemoryManager APIs which take a
Region::Access to actually use that type instead of a `u8`.
Eventually the actually m_access can be moved there as well, but
I hit some weird bug where it wasn't using the correct operators
in `set_access_bit(..)` even though it's declared (and tested).
Something to fix-up later.
Since we know for sure that the virtual memory regions in the new
process being created are not being used on any CPU, there's no need
to do TLB flushes for every mapped page.
(...and ASSERT_NOT_REACHED => VERIFY_NOT_REACHED)
Since all of these checks are done in release builds as well,
let's rename them to VERIFY to prevent confusion, as everyone is
used to assertions being compiled out in release.
We can introduce a new ASSERT macro that is specifically for debug
checks, but I'm doing this wholesale conversion first since we've
accumulated thousands of these already, and it's not immediately
obvious which ones are suitable for ASSERT.
Now that we no longer need to support the signal trampolines being
user-accessible inside the kernel memory range, we can get rid of the
"kernel" and "user-accessible" flags on Region and simply use the
address of the region to determine whether it's kernel or user.
This also tightens the page table mapping code, since it can now set
user-accessibility based solely on the virtual address of a page.
This patch adds sys$msyscall() which is loosely based on an OpenBSD
mechanism for preventing syscalls from non-blessed memory regions.
It works similarly to pledge and unveil, you can call it as many
times as you like, and when you're finished, you call it with a null
pointer and it will stop accepting new regions from then on.
If a syscall later happens and doesn't originate from one of the
previously blessed regions, the kernel will simply crash the process.
This patch adds enforcement of two new rules:
- Memory that was previously writable cannot become executable
- Memory that was previously executable cannot become writable
Unfortunately we have to make an exception for text relocations in the
dynamic loader. Since those necessitate writing into a private copy
of library code, we allow programs to transition from RW to RX under
very specific conditions. See the implementation of sys$mprotect()'s
should_make_executable_exception_for_dynamic_loader() for details.
We need to make sure other processors can grab the MM lock while we
wait, so release it when we might block. Reading the page from
disk may also block, so release it during that time as well.
This was exploitable since the shared flag determines whether inode
permission checks are applied in sys$mprotect().
The bug was pretty hard to spot due to default arguments being used
instead. This patch removes the default arguments to make explicit
at each call site what's being done.
This adds support for FUTEX_WAKE_OP, FUTEX_WAIT_BITSET, FUTEX_WAKE_BITSET,
FUTEX_REQUEUE, and FUTEX_CMP_REQUEUE, as well well as global and private
futex and absolute/relative timeouts against the appropriate clock. This
also changes the implementation so that kernel resources are only used when
a thread is blocked on a futex.
Global futexes are implemented as offsets in VMObjects, so that different
processes can share a futex against the same VMObject despite potentially
being mapped at different virtual addresses.
If we remap pages (e.g. lazy allocation) inside a VMObject that is
shared among more than one region, broadcast it to any other region
that may be mapping the same page.
Before this change, we would sometimes map a region into the address
space with !is_shared(), and then moments later call set_shared(true).
I found this very confusing while debugging, so this patch makes us pass
the initial shared flag to the Region constructor, ensuring that it's in
the correct state by the time we first map the region.
By designating a committed page pool we can guarantee to have physical
pages available for lazy allocation in mappings. However, when forking
we will overcommit. The assumption is that worst-case it's better for
the fork to die due to insufficient physical memory on COW access than
the parent that created the region. If a fork wants to ensure that all
memory is available (trigger a commit) then it can use madvise.
This also means that fork now can gracefully fail if we don't have
enough physical pages available.
Rather than lazily committing regions by default, we now commit
the entire region unless MAP_NORESERVE is specified.
This solves random crashes in low-memory situations where e.g. the
malloc heap allocated memory, but using pages that haven't been
used before triggers a crash when no more physical memory is available.
Use this flag to create large regions without actually committing
the backing memory. madvise() can be used to commit arbitrary areas
of such regions after creating them.
This adds the ability for a Region to define volatile/nonvolatile
areas within mapped memory using madvise(). This also means that
memory purging takes into account all views of the PurgeableVMObject
and only purges memory that is not needed by all of them. When calling
madvise() to change an area to nonvolatile memory, return whether
memory from that area was purged. At that time also try to remap
all memory that is requested to be nonvolatile, and if insufficient
pages are available notify the caller of that fact.
Since the CPU already does almost all necessary validation steps
for us, we don't really need to attempt to do this. Doing it
ourselves doesn't really work very reliably, because we'd have to
account for other processors modifying virtual memory, and we'd
have to account for e.g. pages not being able to be allocated
due to insufficient resources.
So change the copy_to/from_user (and associated helper functions)
to use the new safe_memcpy, which will return whether it succeeded
or not. The only manual validation step needed (which the CPU
can't perform for us) is making sure the pointers provided by user
mode aren't pointing to kernel mappings.
To make it easier to read/write from/to either kernel or user mode
data add the UserOrKernelBuffer helper class, which will internally
either use copy_from/to_user or directly memcpy, or pass the data
through directly using a temporary buffer on the stack.
Last but not least we need to keep syscall params trivial as we
need to copy them from/to user mode using copy_from/to_user.
Sometimes a physical underlying page may be there, but we may be
unable to allocate a page table that may be needed to map it. Bubble
up such mapping errors so that they can be handled more appropriately.
This is something I've been meaning to do for a long time, and here we
finally go. This patch moves all sys$foo functions out of Process.cpp
and into files in Kernel/Syscalls/.
It's not exactly one syscall per file (although it could be, but I got
a bit tired of the repetitive work here..)
This makes hacking on individual syscalls a lot less painful since you
don't have to rebuild nearly as much code every time. I'm also hopeful
that this makes it easier to understand individual syscalls. :^)
This patch adds PageFaultResponse::OutOfMemory which informs the fault
handler that we were unable to allocate a necessary physical page and
cannot continue.
In response to this, the kernel will crash the current process. Because
we are OOM, we can't symbolicate the crash like we normally would
(since the ELF symbolication code needs to allocate), so we also
communicate to Process::crash() that we're out of memory.
Now we can survive "allocate 300 MB" (only the allocate process dies.)
This is definitely not perfect and can easily end up killing a random
innocent other process who happened to allocate one page at the wrong
time, but it's a *lot* better than panicking on OOM. :^)
Since a Region is basically a view into a potentially larger VMObject,
it was always necessary to include the Region starting offset when
accessing its underlying physical pages.
Until now, you had to do that manually, but this patch adds a simple
Region::physical_page() for read-only access and a physical_page_slot()
when you want a mutable reference to the RefPtr<PhysicalPage> itself.
A lot of code is simplified by making use of this.
