This should allow us to add a Element::attribute which returns an
Optional<String>. Eventually all callers should be ported to switch from
the DeprecatedString version, but in the meantime, this should allow us
to port some more IDL interfaces away from DeprecatedString.
Previously, the code assumed that in dividing up the space in the
affected tracks there would never be an overshoot. Instead, we can
check for each track how much extra space is left and never consume any
extra.
In the same way, we can ensure that all extra space is consumed by
distributing all remaining extra space starting from the first track.
Thus, if there is no growth limit, the space distribution should always
consume all the extra space.
The spec says that the sum of affected size + item-incurred increase
should reach the limit, rather than just the item-incurred increase.
This seems to improve layout on the testcase `row-span-2-with-gaps`.
The extra line of space at the bottom of the left div
(`div.grid-item.item-span-two`) is not present anymore, matching other
browsers' layout much more closely.
The final used values for these properties is stored in the layout node,
so we need to make sure they are propagated there as well when doing
table box fixup.
Some replaced elements can have intrinsic aspect ratios but no
intrinsic size. In these cases, the tentative sizes are undefined, and
can therefore sometimes be zero. However, when resolving the size
constraints, we are already guaranteed to have an intrinsic aspect
ratio, so let's use that instead to calculate the resolved sizes.
Previously, we would run through all the constraints in the spec one by
one, but if we check and resolve each constraint in the order they are
defined in the spec, only the first four will ever match.
This leads me to believe that these constraints are meant to be
mutually exclusive instead, meaning that we must check the most
specific constraints first and return upon the first resolution that
matches.
This allows us to retain perfect precision for aspect ratios derived
from either the intrinsic sizes of replaced elements, or the
`aspect-ratio` CSS property.
There's a particularly awkward case where the static position of an
abspos child of a flex container is dependent on its height. This can
happen when `align-items: center` is in effect, as we have to adjust
the abspos child's Y position by half of its height.
This patch solves the issue by reordering operations in the abspos
height resolution algorithm, to make sure that height is resolved
before the static position is calculated.
Using flex layout inside button solves the issue with wrongly calculated
height when it has: pseudo element and whitespaces inside.
Also using flex instead of a table layout allows for the same vertical
alignment but with fewer layout nodes: a flex container and anonymous
wrapper for content instead of a table wrapper, table, row, and cell.
Before this change, we were creating a new anonymous flex item for every
inline-level child of a flex container, even when we had a sequence of
inline-level children.
The fix here is to simply keep putting things in the last child of the
flex container, if that child is already an anonymous flex item.
Previously we always set the height of the HTML element equal to the
viewport height but now this will only happen in quirks mode as it is
intended. Otherwise the html element height will be computed as auto.
Since we always pass the px value as an argument to resolved(), we can
pass it directly as CSSPixels instead of wrapping it in Length. This
approach allows us to avoid converting to a double, resulting in fewer
precision issues.
When text paintables shift around in the tree due to line wrapping,
we may end up in a situation where some text node does not generate
a paintable (due to being all whitespace, for example), even though
in the previous layout pass, it *did* generate a paintable.
To prevent holding on to old paintables in such cases, we now do a
pass in LayoutState::commit() where we explicitly detach all old
paintables from the layout tree.
We need to start looking from the beginning of current row if adding
new implicit column track made enough space to accomodate spanning item
This fixes placement for spanning grid items when `grid-auto-flow` is
specified to `column`.
If the table used width has to be adjusted because of a cell with
percentage width, add back the undistributable space due to border
spacing. This is consistent with the width distribution algorithm, which
sets aside the undistributable space and the behavior of other browsers.
When the grid layout gets to
`resolve_items_box_metrics(GridDimension::Column)`, we've already
determined the width of each column. However, the widths of the
individual grid items themselves haven't been set. Rather than using
`get_available_space_for_item()`, which returns an indefinite size if
an item's width/height hasn't been set, we should use the already
known track width as the available size to calculate the fit-content
width.
This is intended to annotate conversions from unknown floating-point
values to CSSPixels, and make it more obvious the fp value will be
rounded to the nearest fixed-point value.
In general it is not safe to convert any arbitrary floating-point value
to CSSPixels. CSSPixels has a resolution of 0.015625, which for small
values (e.g. scale factors between 0 and 1), can produce bad results
if converted to CSSPixels then scaled back up. In the worst case values
can underflow to zero and produce incorrect results.
- Ambiguous `raw_value()` method is replaced with `line_number()` and
`span()`.
- `line_name()` that before returned either line name or area name is
replaced with `line_name()` and `area_name()`.
- `Position` type is replaced with `Line` and `Area` type so we don't
have to guess while doing layout.
Affected test expectations:
- `template-lines-and-areas` - improvement over what we had before.
- `named-tracks` - rebaseline a giant test. will have to split it into
smaller tests in the future.
We were relying on the table fixup algorithm to insert the missing table
row, which fails to do so when we only have an image in the button.
While that might be a problem with the table fixup algorithm, we should
build a correct layout tree explicitly anyway.
Fixes crashes on GitHub.
With this change, elements that want to receive viewport rect updates
will need to register on document instead of the browsing context.
This change solves the problem where a browsing context for a document
is guaranteed to exist only while the document is active so browsing
context might not exit by the time DOM node that want to register is
constructed.
This is a part of preparation work before switching to navigables where
this issue becomes more visible.
Check the width of the next token after white space to decide line
breaks. The next width can also be the total width of multiple tokens.
This better follows the CSS Text specification and matches behavior of
other browsers.
Fixes#20388.
And treat them as "auto" for now, per CSS-SIZING-3, with a FIXME about
supporting more layout directions.
This fixes an issue on MDN where `height: max-content` was not
overriding height from non-CSS presentational hints.
CSS-ALIGN-3 tells us that `normal` behavior inside flex containers is
simply to behave as `stretch` so this patch makes them behave the same
inside FFC.
Furthermore, we change the `align-items` initial value to `normal`,
matching other engines.
Avoid unintentionally converting between float and double multiple times
by just using double everywhere. Also, remove the unused `int` versions
of their constructors.
I'm about to make StackingContext traverse the paintable tree instead of
actually traversing the layout tree, and it turns out we were not
creating paintables for these SVG elements.
Also switch them to Layout::Box instead of the default InlineNode to
make the trees look a bit less weird. Ultimately, we should do something
specialized for these subtrees, but for now this'll do.
This patch just adds the new root paintable and updates the tests
expectations. The next patch will move painting logic from the layout
viewport to the paint viewport.
Until now, paint trees have been piggybacking on the layout tree for
traversal, and paintables didn't actually have their own parent/child
pointers.
This patch changes that by making Paintable inherit from TreeNode, and
adding a new pass to LayoutState::commit() where we recursively build
the new paint tree.
