Lots of people are confused by the error message you get when the
Toolchain is behind/messed up:
'initializer-list: No such file or directory'
Before this error can happen, catch the problem at CMake configure time,
and provide them with an actionable error message.
Make this stuff a bit easier to maintain by using the
root level variables to build up the Toolchain paths.
Also leave a note for future editors of BuildIt.sh to
give them warning about the other changes they'll need
to make.
Previously the E1000 network adapter would stop receiving further
packets when an RX buffer overrun occurred. This was the case
when connecting the adapter to a real network where enough broadcast
traffic caused the buffer to be full before the kernel had a chance
to clear the RX buffer.
If we get an absolute time passed to one of the pthread_*wait methods,
this is not an absolute monotonic time but rather an absolute wall
time. This means that we also need to pass FUTEX_CLOCK_REALTIME to the
futex syscall to ensure we're not using the monotonic clock.
This patch moves selection updates outside movement functions in
EditingEngine. Previously, movement functions would automatically
update the selection based on whether the Shift key was pressed down
during movement. However, not all EditingEngine subclasses want that;
VimEditingEngine being a good example (because all selection is handled
in visual mode).
Therefore, this patch moves all selection updating to
EditingEngine::on_key(). Subclasses wishing to provide custom movement
and selection semantics should override it (and VimEditingEngine already
does).
When a new Window instance is added to the WindowManager, it does not
yet have an updated value for `m_frame->rect()` and we're not checking
if there is a new candidate for the hovered window, which we need to do
since the mouse cursor might hover above the newly opened window.
This fixes both issues: as soon as a Window frame's rect is changed,
ask the WindowManager to reevaluate its hovered window. This takes care
of newly opened windows _and_ windows that are programmatically changed
in size.
This works because when a Window becomes hovered, the WindowManager
sends out an enter event. This event in turn triggers the Window to
evaluate the cursor type under the mouse position and to update it when
necessary.
Fixes#4809.
LibAudio's WavLoader plugin for loading WAV files now supports loading
audio files with 32-bit float or 64-bit float samples.
By supporting these new non-int sample formats, Audio::Buffer now stores
the sample format (out of a list of supported formats) instead of the
raw bit depth. (The bit depth is easily calculated with
pcm_bits_per_sample)
The overall design is the same, but we change a few things,
like decreasing the amount of blocking forever loops. The goal
is to ensure the kernel won't hang forever when dealing with
buggy hardware.
Also, we reset the channel when initializing it, just in case the
hardware was in bad state before we start use it.
The last IP address in an IPv4 subnet is considered the directed
broadcast address, e.g. for 192.168.3.0/24 the directed broadcast
address is 192.168.3.255. We need to consider this address as
belonging to the interface.
Here's an example with this fix applied, SerenityOS has 192.168.3.190:
[gunnar@nyx ~]$ ping -b 192.168.3.255
WARNING: pinging broadcast address
PING 192.168.3.255 (192.168.3.255) 56(84) bytes of data.
64 bytes from 192.168.3.175: icmp_seq=1 ttl=64 time=0.950 ms
64 bytes from 192.168.3.188: icmp_seq=1 ttl=64 time=2.33 ms
64 bytes from 192.168.3.46: icmp_seq=1 ttl=64 time=2.77 ms
64 bytes from 192.168.3.41: icmp_seq=1 ttl=64 time=4.15 ms
64 bytes from 192.168.3.190: icmp_seq=1 ttl=64 time=29.4 ms
64 bytes from 192.168.3.42: icmp_seq=1 ttl=64 time=30.8 ms
64 bytes from 192.168.3.55: icmp_seq=1 ttl=64 time=31.0 ms
64 bytes from 192.168.3.30: icmp_seq=1 ttl=64 time=33.2 ms
64 bytes from 192.168.3.31: icmp_seq=1 ttl=64 time=33.2 ms
64 bytes from 192.168.3.173: icmp_seq=1 ttl=64 time=41.7 ms
64 bytes from 192.168.3.43: icmp_seq=1 ttl=64 time=47.7 ms
^C
--- 192.168.3.255 ping statistics ---
1 packets transmitted, 1 received, +10 duplicates, 0% packet loss,
time 0ms, rtt min/avg/max/mdev = 0.950/23.376/47.676/16.539 ms
[gunnar@nyx ~]$
This turns the perfcore format into more a log than it was before,
which lets us properly log process, thread and region
creation/destruction. This also makes it unnecessary to dump the
process' regions every time it is scheduled like we did before.
Incidentally this also fixes 'profile -c' because we previously ended
up incorrectly dumping the parent's region map into the profile data.
Log-based mmap support enables profiling shared libraries which
are loaded at runtime, e.g. via dlopen().
This enables profiling both the parent and child process for
programs which use execve(). Previously we'd discard the profiling
data for the old process.
The Profiler tool has been updated to not treat thread IDs as
process IDs anymore. This enables support for processes with more
than one thread. Also, there's a new widget to filter which
process should be displayed.
If you start a URL with a '?' character, the Browser will use the
user-selected search engine (none by default).
For now, there are several engines hardcoded and there is no support
for custom search engines.
- Reorganized some variables (alphabetically and based on their function) so that the new ones don't stick out.
- See: https://github.com/SerenityOS/serenity/issues/6068
Co-authored-by: Linus Groh <mail@linusgroh.de>
We don't support hashes from external files (anymore), downloading
another file for integrity validation is pointless. As as result, these
two ports would refuse to build as their hashes were missing.
Fixes#6645.
