When calculating the edge offset of the next floating item based on the
offset of the preceding floating item, we need to ensure that the
preceding offset is always > 0. This isn't explicitly written in the
spec, but all other popular engines do that.
Fixes https://github.com/SerenityOS/serenity/issues/21023
Before, we completely ignored clearance for block-level boxes if they
were floated. This was incorrect because it is valid for a block-level
box to be floated and still have clearance. However, unlike clearance
on normal flow boxes, clearance on floating boxes does not affect the
y-position of subsequent normal flow boxes. Instead, it pushes the
box's position to the very beginning of an edge.
Work towards https://github.com/SerenityOS/serenity/issues/21023
This is a simple mapping of some code-points to others.
I was going to use a ref test for this, but without knowing that the
font contains the code-points (which SerenitySans does not) we'd be
comparing a series of replacement characters to a series of replacement
characters, which doesn't tell you if they're the right code-points
underneath.
This one is a bit fun because it can be `add(<integer>)` or `auto-add`,
but children have to inherit the computed value not the specified one.
We also have to compute it before computing the font-size, because of
`font-size: math` which will be implemented later.
Previously we were overly generous in what we accepted for `display`.
For example, we accepted:
- Multiple outside or inside identifiers
- Unrecognized identifiers
- Non-identifier tokens
Now, we reject all these cases. This makes us stop accepting the
`display: block math;` declaration in `MathML/Default.css`, and so the
one layout test we have containing MathML elements has changed to
reflect that.
When a button should use flex for alignment and also has ::before
and/or ::after, we previously did the following:
1. Prepended/appended the button's children with boxes for
pseudo-elements.
2. Replaced the button's direct children with a flex container that
contains its children.
As a result, the generated boxes for ::before/::after ended up as
children of the generated flex item, instead of being direct children
of the button layout box as they were supposed to be.
This change reverses these steps, ensuring that boxes for
pseudo-elements are generated only after modifications inside the
button layout are completed.
When modifying the button layout during tree building to use flex for
vertical alignment, let's explicitly set the button box's children to
be non-inline. It doesn't make sense to layout the button as an IFC
when its only child is a flex container.
Before, we were using the line height from NodeWithStyle::line_height()
to calculate the y offset for floats inside the IFC. However, this
value doesn't always correspond to the actual height of a line box. For
instance, adding a fragment for an inline-block might change the height
of the line box. With this change, we recalculate the height of the
line box after adding a new fragment and use this recalculated height
value to determine the y position for floats.
Fixes https://github.com/SerenityOS/serenity/issues/20982
If an element is created from JS, it might have its contents modified
before it is inserted into the document. In this case, we don't have a
shadow tree yet and so trying to set m_text_node's text content would
cause a null dereference. So let's not do that. :^)
That case also means that by the time we do create the shadow tree, we
have the text content already, so we can set it there.
Added a test to verify that we don't crash, and that the text content
appears in the textarea whether it was inserted by JS or by the HTML
parser.
This change allows IDL interfaces to be compiled using new AK String
which have a attribute in the interface that may return null.
Without this change we would run into a compile error from code such as
the following example:
```
auto retval = impl->deprecated_attribute(HTML::AttributeNames::ref);
if (!retval.has_value()) {
return JS::js_null();
}
return JS::PrimitiveString::create(vm, retval.release_value());
```
As `deprecated_attribute` returns a `DeprecatedString` instead of an
`Optional<String>`. Fix that by using the non-deprecated attribute
implementation, and falling back to the empty string for where we cannot
return null.
Also add a test here to cover a regression I almost introduced here
which was not previously covered by our test suite.
Ideally, all of this should actually just be calling
Element::get_attribute_value, but I'm not entirely sure at this stage
what the behavioral change would be to test for here. Since this
implementation preserves the previous behavior, stick with it, and add a
FIXME for now.
Previously, the code assumed that in dividing up the space in the
affected tracks there would never be an overshoot. Instead, we can
check for each track how much extra space is left and never consume any
extra.
In the same way, we can ensure that all extra space is consumed by
distributing all remaining extra space starting from the first track.
Thus, if there is no growth limit, the space distribution should always
consume all the extra space.
The spec says that the sum of affected size + item-incurred increase
should reach the limit, rather than just the item-incurred increase.
This seems to improve layout on the testcase `row-span-2-with-gaps`.
The extra line of space at the bottom of the left div
(`div.grid-item.item-span-two`) is not present anymore, matching other
browsers' layout much more closely.
Support the optional `<attr-type>` parameter to the `attr()` function,
which allows parsing the attribute's value as a variety of types,
instead of always as a string.
The final used values for these properties is stored in the layout node,
so we need to make sure they are propagated there as well when doing
table box fixup.
Some replaced elements can have intrinsic aspect ratios but no
intrinsic size. In these cases, the tentative sizes are undefined, and
can therefore sometimes be zero. However, when resolving the size
constraints, we are already guaranteed to have an intrinsic aspect
ratio, so let's use that instead to calculate the resolved sizes.
This allows us to retain perfect precision for aspect ratios derived
from either the intrinsic sizes of replaced elements, or the
`aspect-ratio` CSS property.
There's a particularly awkward case where the static position of an
abspos child of a flex container is dependent on its height. This can
happen when `align-items: center` is in effect, as we have to adjust
the abspos child's Y position by half of its height.
This patch solves the issue by reordering operations in the abspos
height resolution algorithm, to make sure that height is resolved
before the static position is calculated.
Using flex layout inside button solves the issue with wrongly calculated
height when it has: pseudo element and whitespaces inside.
Also using flex instead of a table layout allows for the same vertical
alignment but with fewer layout nodes: a flex container and anonymous
wrapper for content instead of a table wrapper, table, row, and cell.
Before this change, we were creating a new anonymous flex item for every
inline-level child of a flex container, even when we had a sequence of
inline-level children.
The fix here is to simply keep putting things in the last child of the
flex container, if that child is already an anonymous flex item.
Previously we always set the height of the HTML element equal to the
viewport height but now this will only happen in quirks mode as it is
intended. Otherwise the html element height will be computed as auto.
Rather than modify the transform of the parent (which could change
independently), this adds a new override element_transform() where
element specific tranfroms can be applied. This will always stay in
sync with the attributes.
A ref test comparing a .svg and .html version of the same file is
added as due to differences in attribute parsing order, the .svg version
was previously drawn incorrectly.
Fixes#20859
None of the existing tests contain a URL which has a fragment in them,
but this does verify that the URL parser does not actually find any!
Also, this should let us verify the correctness of URLs which actually
do contain fragments.
Since we always pass the px value as an argument to resolved(), we can
pass it directly as CSSPixels instead of wrapping it in Length. This
approach allows us to avoid converting to a double, resulting in fewer
precision issues.
When text paintables shift around in the tree due to line wrapping,
we may end up in a situation where some text node does not generate
a paintable (due to being all whitespace, for example), even though
in the previous layout pass, it *did* generate a paintable.
To prevent holding on to old paintables in such cases, we now do a
pass in LayoutState::commit() where we explicitly detach all old
paintables from the layout tree.
We need to start looking from the beginning of current row if adding
new implicit column track made enough space to accomodate spanning item
This fixes placement for spanning grid items when `grid-auto-flow` is
specified to `column`.
If the table used width has to be adjusted because of a cell with
percentage width, add back the undistributable space due to border
spacing. This is consistent with the width distribution algorithm, which
sets aside the undistributable space and the behavior of other browsers.
When the grid layout gets to
`resolve_items_box_metrics(GridDimension::Column)`, we've already
determined the width of each column. However, the widths of the
individual grid items themselves haven't been set. Rather than using
`get_available_space_for_item()`, which returns an indefinite size if
an item's width/height hasn't been set, we should use the already
known track width as the available size to calculate the fit-content
width.
In general it is not safe to convert any arbitrary floating-point value
to CSSPixels. CSSPixels has a resolution of 0.015625, which for small
values (e.g. scale factors between 0 and 1), can produce bad results
if converted to CSSPixels then scaled back up. In the worst case values
can underflow to zero and produce incorrect results.
This means StyleComputer::resolve_unresolved_style_value() always
returns a value, so we can change its return type.
However, it does still return an UnresolvedStyleValue sometimes, so we
can't remove those checks from the user code.
