mirror of
https://github.com/RGBCube/serenity
synced 2025-05-19 05:45:08 +00:00

This class is intended to replace all IOAddress usages in the Kernel codebase altogether. The idea is to ensure IO can be done in arch-specific manner that is determined mostly in compile-time, but to still be able to use most of the Kernel code in non-x86 builds. Specific devices that rely on x86-specific IO instructions are already placed in the Arch/x86 directory and are omitted for non-x86 builds. The reason this works so well is the fact that x86 IO space acts in a similar fashion to the traditional memory space being available in most CPU architectures - the x86 IO space is essentially just an array of bytes like the physical memory address space, but requires x86 IO instructions to load and store data. Therefore, many devices allow host software to interact with the hardware registers in both ways, with a noticeable trend even in the modern x86 hardware to move away from the old x86 IO space to exclusively using memory-mapped IO. Therefore, the IOWindow class encapsulates both methods for x86 builds. The idea is to allow PCI devices to be used in either way in x86 builds, so when trying to map an IOWindow on a PCI BAR, the Kernel will try to find the proper method being declared with the PCI BAR flags. For old PCI hardware on non-x86 builds this might turn into a problem as we can't use port mapped IO, so the Kernel will gracefully fail with ENOTSUP error code if that's the case, as there's really nothing we can do within such case. For general IO, the read{8,16,32} and write{8,16,32} methods are available as a convenient API for other places in the Kernel. There are simply no direct 64-bit IO API methods yet, as it's not needed right now and is not considered to be Arch-agnostic too - the x86 IO space doesn't support generating 64 bit cycle on IO bus and instead requires two 2 32-bit accesses. If for whatever reason it appears to be necessary to do IO in such manner, it could probably be added with some neat tricks to do so. It is recommended to use Memory::TypedMapping struct if direct 64 bit IO is actually needed.
169 lines
7.8 KiB
C++
169 lines
7.8 KiB
C++
/*
|
|
* Copyright (c) 2020-2022, Liav A. <liavalb@hotmail.co.il>
|
|
*
|
|
* SPDX-License-Identifier: BSD-2-Clause
|
|
*/
|
|
|
|
#include <AK/OwnPtr.h>
|
|
#include <AK/Types.h>
|
|
#include <Kernel/Arch/x86/PCI/IDELegacyModeController.h>
|
|
#include <Kernel/Bus/PCI/API.h>
|
|
#include <Kernel/FileSystem/ProcFS.h>
|
|
#include <Kernel/Library/LockRefPtr.h>
|
|
#include <Kernel/Sections.h>
|
|
#include <Kernel/Storage/ATA/ATADiskDevice.h>
|
|
#include <Kernel/Storage/ATA/GenericIDE/Channel.h>
|
|
|
|
namespace Kernel {
|
|
|
|
UNMAP_AFTER_INIT NonnullLockRefPtr<PCIIDELegacyModeController> PCIIDELegacyModeController::initialize(PCI::DeviceIdentifier const& device_identifier, bool force_pio)
|
|
{
|
|
return adopt_lock_ref(*new PCIIDELegacyModeController(device_identifier, force_pio));
|
|
}
|
|
|
|
UNMAP_AFTER_INIT PCIIDELegacyModeController::PCIIDELegacyModeController(PCI::DeviceIdentifier const& device_identifier, bool force_pio)
|
|
: PCI::Device(device_identifier.address())
|
|
, m_prog_if(device_identifier.prog_if())
|
|
, m_interrupt_line(device_identifier.interrupt_line())
|
|
{
|
|
PCI::enable_io_space(device_identifier.address());
|
|
PCI::enable_memory_space(device_identifier.address());
|
|
PCI::enable_bus_mastering(device_identifier.address());
|
|
enable_pin_based_interrupts();
|
|
initialize(force_pio);
|
|
}
|
|
|
|
bool PCIIDELegacyModeController::is_pci_native_mode_enabled() const
|
|
{
|
|
return (m_prog_if.value() & 0x05) != 0;
|
|
}
|
|
|
|
bool PCIIDELegacyModeController::is_pci_native_mode_enabled_on_primary_channel() const
|
|
{
|
|
return (m_prog_if.value() & 0x1) == 0x1;
|
|
}
|
|
|
|
bool PCIIDELegacyModeController::is_pci_native_mode_enabled_on_secondary_channel() const
|
|
{
|
|
return (m_prog_if.value() & 0x4) == 0x4;
|
|
}
|
|
|
|
bool PCIIDELegacyModeController::is_bus_master_capable() const
|
|
{
|
|
return m_prog_if.value() & (1 << 7);
|
|
}
|
|
|
|
static char const* detect_controller_type(u8 programming_value)
|
|
{
|
|
switch (programming_value) {
|
|
case 0x00:
|
|
return "ISA Compatibility mode-only controller";
|
|
case 0x05:
|
|
return "PCI native mode-only controller";
|
|
case 0x0A:
|
|
return "ISA Compatibility mode controller, supports both channels switched to PCI native mode";
|
|
case 0x0F:
|
|
return "PCI native mode controller, supports both channels switched to ISA compatibility mode";
|
|
case 0x80:
|
|
return "ISA Compatibility mode-only controller, supports bus mastering";
|
|
case 0x85:
|
|
return "PCI native mode-only controller, supports bus mastering";
|
|
case 0x8A:
|
|
return "ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering";
|
|
case 0x8F:
|
|
return "PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering";
|
|
default:
|
|
VERIFY_NOT_REACHED();
|
|
}
|
|
VERIFY_NOT_REACHED();
|
|
}
|
|
|
|
UNMAP_AFTER_INIT void PCIIDELegacyModeController::initialize(bool force_pio)
|
|
{
|
|
dbgln("IDE controller @ {}: interrupt line was set to {}", pci_address(), m_interrupt_line.value());
|
|
dbgln("IDE controller @ {}: {}", pci_address(), detect_controller_type(m_prog_if.value()));
|
|
{
|
|
auto bus_master_base = IOAddress(PCI::get_BAR4(pci_address()) & (~1));
|
|
dbgln("IDE controller @ {}: bus master base was set to {}", pci_address(), bus_master_base);
|
|
}
|
|
|
|
auto initialize_and_enumerate = [&force_pio](IDEChannel& channel) -> void {
|
|
{
|
|
auto result = channel.allocate_resources_for_pci_ide_controller({}, force_pio);
|
|
// FIXME: Propagate errors properly
|
|
VERIFY(!result.is_error());
|
|
}
|
|
{
|
|
auto result = channel.detect_connected_devices();
|
|
// FIXME: Propagate errors properly
|
|
VERIFY(!result.is_error());
|
|
}
|
|
};
|
|
|
|
if (!is_bus_master_capable())
|
|
force_pio = true;
|
|
|
|
OwnPtr<IOWindow> primary_base_io_window;
|
|
OwnPtr<IOWindow> primary_control_io_window;
|
|
if (!is_pci_native_mode_enabled_on_primary_channel()) {
|
|
primary_base_io_window = IOWindow::create_for_io_space(IOAddress(0x1F0), 8).release_value_but_fixme_should_propagate_errors();
|
|
primary_control_io_window = IOWindow::create_for_io_space(IOAddress(0x3F6), 4).release_value_but_fixme_should_propagate_errors();
|
|
} else {
|
|
auto primary_base_io_window = IOWindow::create_for_pci_device_bar(pci_address(), PCI::HeaderType0BaseRegister::BAR0).release_value_but_fixme_should_propagate_errors();
|
|
auto pci_primary_control_io_window = IOWindow::create_for_pci_device_bar(pci_address(), PCI::HeaderType0BaseRegister::BAR1).release_value_but_fixme_should_propagate_errors();
|
|
// Note: the PCI IDE specification says we should access the IO address with an offset of 2
|
|
// on native PCI IDE controllers.
|
|
primary_control_io_window = pci_primary_control_io_window->create_from_io_window_with_offset(2, 4).release_value_but_fixme_should_propagate_errors();
|
|
}
|
|
|
|
VERIFY(primary_base_io_window);
|
|
VERIFY(primary_control_io_window);
|
|
|
|
OwnPtr<IOWindow> secondary_base_io_window;
|
|
OwnPtr<IOWindow> secondary_control_io_window;
|
|
|
|
if (!is_pci_native_mode_enabled_on_primary_channel()) {
|
|
secondary_base_io_window = IOWindow::create_for_io_space(IOAddress(0x170), 8).release_value_but_fixme_should_propagate_errors();
|
|
secondary_control_io_window = IOWindow::create_for_io_space(IOAddress(0x376), 4).release_value_but_fixme_should_propagate_errors();
|
|
} else {
|
|
secondary_base_io_window = IOWindow::create_for_pci_device_bar(pci_address(), PCI::HeaderType0BaseRegister::BAR2).release_value_but_fixme_should_propagate_errors();
|
|
auto pci_secondary_control_io_window = IOWindow::create_for_pci_device_bar(pci_address(), PCI::HeaderType0BaseRegister::BAR3).release_value_but_fixme_should_propagate_errors();
|
|
// Note: the PCI IDE specification says we should access the IO address with an offset of 2
|
|
// on native PCI IDE controllers.
|
|
secondary_control_io_window = pci_secondary_control_io_window->create_from_io_window_with_offset(2, 4).release_value_but_fixme_should_propagate_errors();
|
|
}
|
|
VERIFY(secondary_base_io_window);
|
|
VERIFY(secondary_control_io_window);
|
|
|
|
auto primary_bus_master_io = IOWindow::create_for_pci_device_bar(pci_address(), PCI::HeaderType0BaseRegister::BAR4, 16).release_value_but_fixme_should_propagate_errors();
|
|
auto secondary_bus_master_io = primary_bus_master_io->create_from_io_window_with_offset(8).release_value_but_fixme_should_propagate_errors();
|
|
|
|
// FIXME: On IOAPIC based system, this value might be completely wrong
|
|
// On QEMU for example, it should be "u8 irq_line = 22;" to actually work.
|
|
auto irq_line = m_interrupt_line.value();
|
|
|
|
if (is_pci_native_mode_enabled()) {
|
|
VERIFY(irq_line != 0);
|
|
}
|
|
|
|
auto primary_channel_io_window_group = IDEChannel::IOWindowGroup { primary_base_io_window.release_nonnull(), primary_control_io_window.release_nonnull(), move(primary_bus_master_io) };
|
|
auto secondary_channel_io_window_group = IDEChannel::IOWindowGroup { secondary_base_io_window.release_nonnull(), secondary_control_io_window.release_nonnull(), move(secondary_bus_master_io) };
|
|
|
|
if (is_pci_native_mode_enabled_on_primary_channel()) {
|
|
m_channels.append(IDEChannel::create(*this, irq_line, move(primary_channel_io_window_group), IDEChannel::ChannelType::Primary));
|
|
} else {
|
|
m_channels.append(IDEChannel::create(*this, move(primary_channel_io_window_group), IDEChannel::ChannelType::Primary));
|
|
}
|
|
initialize_and_enumerate(m_channels[0]);
|
|
m_channels[0].enable_irq();
|
|
|
|
if (is_pci_native_mode_enabled_on_secondary_channel()) {
|
|
m_channels.append(IDEChannel::create(*this, irq_line, move(secondary_channel_io_window_group), IDEChannel::ChannelType::Secondary));
|
|
} else {
|
|
m_channels.append(IDEChannel::create(*this, move(secondary_channel_io_window_group), IDEChannel::ChannelType::Secondary));
|
|
}
|
|
initialize_and_enumerate(m_channels[1]);
|
|
m_channels[1].enable_irq();
|
|
}
|
|
|
|
}
|