This implements a number of changes related to time:
* If a HPET is present, it is now used only as a system timer, unless
the Local APIC timer is used (in which case the HPET timer will not
trigger any interrupts at all).
* If a HPET is present, the current time can now be as accurate as the
chip can be, independently from the system timer. We now query the
HPET main counter for the current time in CPU #0's system timer
interrupt, and use that as a base line. If a high precision time is
queried, that base line is used in combination with quering the HPET
timer directly, which should give a much more accurate time stamp at
the expense of more overhead. For faster time stamps, the more coarse
value based on the last interrupt will be returned. This also means
that any missed interrupts should not cause the time to drift.
* The default system interrupt rate is reduced to about 250 per second.
* Fix calculation of Thread CPU usage by using the amount of ticks they
used rather than the number of times a context switch happened.
* Implement CLOCK_REALTIME_COARSE and CLOCK_MONOTONIC_COARSE and use it
for most cases where precise timestamps are not needed.
Problem:
- `Streamer` is the same in [PBM,PGM,PPM]Loader class implementations.
Solution:
- Extract it to its own header file to reduce maintenance burden.
- Implement `read` in terms of `read_bytes` to make the class "DRY".
- Decorate all functions with `constexpr`.
This is a very WIP port bringing stress-ng to SerenityOS.
stress-ng is great at doing multi-workload stress testing, this allows it to
find unique and interesting intermixed pairs of stressful operations which cause bugs.
This initial port just rips out an non applicable functionality in order to get
the port to compile.
The StorageManagement class has 2 roles:
1. During boot, it should find all storage controllers in the machine,
and then determine what is the boot device.
2. Later on boot, it is a registrar of all storage controllers and
storage devices. Thus, it could be used to show information about these
devices when implemented.
This change allows the user to specify a boot driver other than /dev/hda
and if it's connected in the machine - it will boot.
Previously, the indexing scheme was that 0 is Primary-Master, 1 is
Primary-Slave, 2 is Secondary-Master, 3 is Secondary-Slave.
Instead of merely matching between numbers to the channel & position,
the IDEController code will try to find all available drives connected to
the two channels, then it will create a Vector with nonnull RefPtr to
them. Then we take use the given index with this Vector.
This new subsystem is somewhat replacing the IDE disk code we had with a
new flexible design.
StorageDevice is a generic class that represent a generic storage
device. It is meant that specific storage hardware will override the
interface. StorageController is a generic class that represent
a storage controller that can be found in a machine.
The IDEController class governs two IDEChannels. An IDEChannel is
responsible to manage the master & slave devices of the channel,
therefore an IDEChannel is an IRQHandler.
IRQ 7 and 15 on the PIC architecture are used for spurious interrupts.
IRQ 7 could also be used for LPT connection, and IRQ 15 can be used for
the secondary IDE channel. Therefore, we need to allow to install a
real IRQ handler and check if a real IRQ was asserted. If so, we handle
them in the usual way.
A note on this fix - unregistering or registering a new IRQ handler
after we already registered one in the spurious interrupt handler is
not supported yet.
Such device is not an IRQHandler by itself, but actually a controller of
many IRQ or MSI devices. The purpose of this class is to manage multiple
sources of interrupts.
For example, a generic ISA IDE controller controls 2 IRQ sources - 14
and 15. So, when we initialize the IDE controller, it will initialize
two IDE channels (also known as PATAChannels) to utilize IRQ 14 and 15,
respectively. NVMe with MSI-X support can theoretically handle up to
2048 interrupts.
New serenity_app() targets can be defined which allows application
icons to be emedded directly into the executable. The embedded
icons will then be used when creating an icon for that file in
LibGUI.
If an ELF application contains sections called "serenity_icon_s"
or "serenity_icon_m" then parse these as PNG images and use them
for the 16x16 and 32x32 executable file icons respectively.
If the application is not an ELF binary, the sections do not
exist, the sections are not valid PNGs, or the file cannot be read
then the default application icon will be used.
Problem:
- `(void)` simply casts the expression to void. This is understood to
indicate that it is ignored, but this is really a compiler trick to
get the compiler to not generate a warning.
Solution:
- Use the `[[maybe_unused]]` attribute to indicate the value is unused.
Note:
- Functions taking a `(void)` argument list have also been changed to
`()` because this is not needed and shows up in the same grep
command.
Problem:
- Interface is too permissive. It permits iterators of different types
as long as they are comparable.
Solution:
- Require iterators be the same type.
Switch on the new credentials before loading the new executable into
memory. This ensures that attempts to ptrace() the program from an
unprivileged process will fail.
This covers one bug that was exploited in the 2020 HXP CTF:
https://hxp.io/blog/79/hxp-CTF-2020-wisdom2/
Thanks to yyyyyyy for finding the bug! :^)
Keep the debug symbols for shared libraries in memory after we opened
them the first time. This dramatically speeds up symbolication of
backtraces when running dynamically linked programs in UE.
This patch replaces the UI-from-JSON mechanism with a more
human-friendly DSL.
The current implementation simply converts the GML into a JSON object
that can be consumed by GUI::Widget::load_from_json(). The parser is
not very helpful if you make a mistake.
The language offers a very simple way to instantiate any registered
Core::Object class by simply saying @ClassName
@GUI::Label {
text: "Hello friends!"
tooltip: ":^)"
}
Layouts are Core::Objects and can be assigned to the "layout" property:
@GUI::Widget {
layout: @GUI::VerticalBoxLayout {
spacing: 2
margins: [8, 8, 8, 8]
}
}
And finally, child objects are simply nested within their parent:
@GUI::Widget {
layout: @GUI::HorizontalBoxLayout {
}
@GUI::Button {
text: "OK"
}
@GUI::Button {
text: "Cancel"
}
}
This feels a *lot* more pleasant to write than the JSON we had. The fact
that no new code was being written with the JSON mechanism was pretty
telling, so let's approach this with developer convenience in mind. :^)
The "border" property is a shorthand that expands into multiple
longhand properties. We shouldn't leave it set in a StyleProperties
after expanding it.
